Description

New Page 1

With Lionel’s LCS SensorTrack, you can add automated action to your layout!

LCS SensorTrack is a 5″ straight track section equipped with an infra-red
receiver that reads data beamed out of all LEGACY locomotives that are equipped
with an infra-red transmitter. It is a simple hookup with pre-made LCS PDI
Cables available in a variety of lengths. It automatically programs LEGACY CAB-2
remotes with vital engine information, including road names and road numbers
from any transmitter-equipped engine, replacing the orange locomotive modules.

LCS SensorTrack also replaces the TMCC Action Recorder Controller (6-14181),
letting you record and then execute custom track actions and layout scenarios
you create, such as customized stops, direction changes, throwing switches, and
uncoupling. Actions are easily programmed via CAB-1L, CAB-2, or LCS App and each
SensorTrack can store two custom recordingsone for each direction of travel.

SensorTrack Capabilities and Features:

Set the LCS SensorTrack to automatically perform one of eight pre-programmed
actions every time an IR equipped locomotive passes over it.

Pre-programmed actions include whistle and horn blows, CrewTalk, and bell
ringing

Arrival and departure announcements vary according to the engine’s direction of
travel

The LCS SensorTrack gathers all information directly from the locomotive
without the need to use the orange module. This feature is especially useful
when your layout hosts visiting locomotives (LEGACY Command Set required).

Locomotive information and ID automatically load into all of your LEGACY CAB-2
remotes as they pass over the LCS SensorTrack

Create your own custom actions by recording commands made with your CAB remote
or LCS App.

Actions you record can include opening couplers, activating switch tracks, or
any command made with the CAB remote or LCS App.

Your custom action can include up to 250 time-stamped commands

Your custom recordings can be activated by all IR engines passing over the LCS
SensorTrack or

limited to just the locomotive that was used to create the recording.

Each LCS SensorTrack holds two custom recordingsone for each direction of
travel for each IR-equipped locomotive.

NOTE: The LCS SensorTrack works only with IR equipped engines. All Legacy locos
made after November 2011 and ALL Vision locos are IR equipped. For a complete
list of IR equipped locomotives, check out our website at Lionel.com/LCS . A
LEGACY CAB 1L or CAB 2 is required.

PRODUCT SPECIFICATIONS

Gauge: O Gauge

Most Recent Catalog: 2016-2017 Track and Power